Pages

Saturday, December 17, 2022

Yukimu RCA and USB Noise Absorber

Introduction

The Yukimu PNA-RCA01 ("RCA Plug") and PNA-USB01 ("USB Plug") are plug-in noise absorbers designed to absorb high-frequency noise from your audio/video components. These products were designed by Mr. Masahiro Yamazaki, an experienced engineer who worked for Matsushita Electric Industrial, specialising in circuit design for the Technics Brand which is part of Matsushita. 

Carefully selected parts such as British LCR styrene capacitors and Amtrans non-magnetic carbon film resistors (AMRG 2W) are used. The hand-made circuit is hard-wired and soldered using lead-free silver solder.  

A resistor and capacitor circuit is used in conjunction with an electromagnetic wave absorption sheet and metal case of the product to absorb noise. Assuming an output resistance of 220 ohms, Yukimu claims that the RCA Plug attenuates noise at 22 MHz by 18db. R-C circuits are commonly used to reduce noise, so this isn't a snake-oil tweak and is well-grounded in science.

The RCA Plug utilises a brass shell, while the USB Plug uses a A6061 aluminum case.



Description

Both products come in a beautiful wood box, with a certificate confirming that the product was manufactured and evaluated by the named employee which just so happened to be Masahiro-san. 



Yukimu's website explains that the RCA Plug can be used on any RCA analog or digital socket (including output sockets).

In Use

Like any grounding product, some experimentation is required to get the most out of the Yukimu. On a Schitt Freya+ preamp, the effect of the RCA Plug on each socket varied in intensity. The intensity was highest on a spare input, while the output socket was slightly tamer.

Regardless of location, the effect was quite consistent. You get a tightening of the bass, and clearer and more extended high frequencies. While the midrange clarity and texture improved, there is an increase in "presence" that moves vocals forward in the soundstage. While expressiveness of singers improved, sibilance was also more noticeable.  

The preferred intensity will be a matter of taste. I found that the tonality of my system was too forward and bright when used on the input socket, and just right on the output socket. 

The effect of the USB Plug is similar, but I found that the increase in dynamics and bass heft to be more pronounced than the RCA Plug, making the USB Plug sound more balanced. Deployed on the front USB port of my Intel-NUC Roon ROCK server, there was an all-round increase in dynamics, clarity and focus. There was less alteration to the tone of my system and if I had to choose just one, my money would be on the USB Plug. 

The audiophile mind already predicted that using both products at the same time would result in an overly bright and forward presentation. Somehow, both products sounded quite good together, although the tone was still on the bright side of neutral. Who would have guessed?

Conclusion

This is an effective product that is meticulously made. The price tag is reasonable for the performance although some caution should be noted given the resultant shift in tonal balance. Judicious trial and error is required also to get best results -  Highly Recommended.

Yukimu products are available in Singapore from Audio Basic.

Yukimu PNA-RCA01 / PNA-USB01  - S$ 520 each (promotional price)

Audio Basic
1 Coleman Street
#02-12, The Adelphi 
Singapore 179803
http://audiobasic.blogspot.com




  


Sunday, December 4, 2022

International Sound & Sight Exhibition 2022

International Sound & Sight Exhibition (ISSE) ran from the 2nd to 4th of December 2022 at Holiday Inn Singapore Orchard City Centre. This is the very first ISSE held since the COVID pandemic.

Here are the pictures taken and my commentary on the rooms. Apologies for missing out on some rooms due to time constraints. 

EAhibrid and Cornerstone Audio







This room was shared by three exhibitors, EAhibrid, Cornerstone Audio, and a Thai gentleman that was demonstrating his tweaks and footers. EAhibrid was showcasing their Pure DC B1 battery supply that uses 2170 lithium batteries that are also used in Tesla EVs. Mr. Paul Huang, founder of EAhibrid explained some of the technology used in the Pure DC B1. I happen to have one at home, so I will do a detailed review on that soon.

Cornerstone Audio is new to ISSE. For such a young company, they have an impressive list of brands under their belt, including Quadraspire (racks), QLN speakers, Sean Jacob power supplies and Lab 12. 

The very cute looking accessory is both a resonator and grounding device. Called "Meow", they are sold in both male and female version. The ears act as a waveguide and the tail unscrews to accept the grounding cable.  

Atlas Sound & Vision
  




Atlas had two systems on demo. The first system was a combination of NAD electronics and GoldenEar speakers. The limited edition NAD C 3050 LE was available for pre-order too. The classic looks were really attractive. This system surprised me with its big and dynamic sound. I was convinced that the big GoldenEar tower speakers were playing, but it turned out to be the diminutive BRX bookshelf speakers. I did a professional review on these, so I really should have seen it coming.

The Accuphase and KEF setup oozed refinement and control. This was even more surprising as the music was being streamed through a Bluesound Node wireless streamer which was connected to a DAC card in the Accuphase amplifier. Really nice sounding setup!

High End Research




High End Research assembled a relatively modest system this year (by their standards) with A Metronome CD player, Electrocompaniet preamp, Pass Labs power amp and Wilson Audio Alexa V speakers. 

Horizon Acoustics and Project Perfection




Horizon paired their electronics (Totaldac server and DAC, Modwright buffer, AGD pre and monobloc amplifier) with Project Perfection's Diptyque speakers. The sound was very comfortable, relaxing and resolving at the same time. 

The Modwright Analog Bridge is an especially interesting product. Offering a choice of both 6922 and 6SN7 tubes which are switchable on-the-fly, the Analog Bridge also uses a 5AR4 tube rectified power supply. This is the perfect candidate for adding tube warmth into a system. You could use it after a DAC with digital volume control, or a passive preamp.  

Project Perfection



Project Perfection used Audio Research Electronics with Apertura speakers. It baffles me how they got so much clean and deep bass from that modest-sized two way speaker!

Stardust Pictures Pte Ltd





All eyes and ears were on the Falcon LS3/5A gold badge speakers, and for good reason. Supremely musical and engaging, I saw two orders being placed while I was in the room. Stardust are also newly appointed distributors for Alexandria Audio from Bali. 

Simplicity Control - Magico and Luxman


Absolutely beautiful Luxman electronics paired with Magico speakers. 

Ong Radio



I've always had a soft spot for the soft blue meters from the big M. Ong Radio was playing some soft relaxing music when I was there, which was a perfect match for the hypnotic meters. 

Reference Audio


CH Precision and Melco electronics, with Gryphon speakers and amplifier. 

Simplicity Control - The "If you have to ask, you can't afford it" Room




At a wallet busting $ 1,081,925 this system is destined only for the extremely well-heeled. Once upon a time, this would have been considering an eye-watering price tag, but thanks to soaring property costs, this sum only covers about 70-80% of the cost of centrally located public housing in Singapore.

Consisting of Goebel speakers, EMMLabs digital equipment, Kronos/J Sikora/ DS Audio analog equipment, Pilium amplification and Albedo/Goebel cabling, I would describe the sound as tight and supremely controlled.

Sound Decisions




The Sound Decisions boys had a variety of stuff on display. When I was there, the Dutch & Dutch 8C speakers were in play. Supported by an able cast of an Innuous streamer, Merason DAC and Synergistic Research power conditioner, these speakers sounded wonderful. On the last day, room equalisation was employed. So if you heard them on the first and second day, you didn't hear them at their best. These had a tight, grippy and highly detailed sound. 

The Perraux and Amphion gear colourway was quite striking, and may just seal the deal if you are having problems with the Minister of Home Affairs. 

Sky Audio



The Divini Reference 8 speakers sounded good. The drivers look like they are from the Scanspeak Revelator series. Partnering electronics were from SPL. In consistent Sky Audio fashion, the setup was tuned to be musical and engaging. 

Yamaha Singapore




Having heard the NS-5000 speakers at previous ISSE, I can confirm that these are truly special speakers. The previous pairing with Pass Lab amplification was more to my liking though, but these are still worth further investigation.



Saturday, November 19, 2022

Kojo Technology Crystal E Ground Box and Crystal EP Plug

Introduction

Kojo Seiko Co. Ltd is a medium-sized company located in Hirakawa City in Aomori, Japan. Established in 1990, they are involved in a variety of electronic-related businesses ranging from power supply design and manufacturing to audio accessories.

Description

The Crystal EP is a virtual earth product that improves the grounding of audio equipment. The device is a barrel-shaped plug with various connectors available :- RCA, 3.5mm mini plug, banana and spades. The barrel contains 100 cm2 of high-purity aluminum foil treated with a special etching process to create cavities that increase the surface area to 11,000 cm2. The rear of the Crystal EP plug unscrews to accept a grounding cable for connection to the optional Crystal E Ground Box. 

The Crystal E Ground Box is a compact metal ground box that houses an eight-layer plate structure that functions as a virtual ground. The plates comprise a combination of stainless steel, brass and copper plates. The plates are stacked, with a 0.5mm air gap between each plate. The box measures 80mm (W) x 35mm (H) and 111mm (D) and weighs 775 grams.

Picture taken from Kojo's website

There are two screw terminals at each end of the box. One terminal is used to connect the grounding cable to the component or Crystal EP plug, while the other end is used to daisy chain a second Crystal E Ground Box. Two ground cables of 1.2m length are thoughtfully provided in the package, one with spades on both ends, and the other with a spade and RCA plug.

You can use the Crystal EP plug alone, or connected to one or more Crystal E Ground boxes. Alternatively you could use the Crystal E Ground connected directly to the component in question. 




The Crystal EP Plug is made out of three pieces. The first piece is the termination plug and is interchangeable. The second piece is the main housing, and the last piece is the screw terminal that accepts the spade-terminated grounding wire that connects to the E Ground Box. This allows you to easily change the termination plug in case your needs change in the future, and also to stack the plugs if required. How you apply this product in your system is limited only by your imagination.

Sound Quality

Kojo is not my foray into grounding products, being a long-time user of Entreq ground boxes. Grounding accessories take a bit of experimentation to get right, with the results being very much system and component-dependent. Kojo products come in at a lower price-point compared to Entreq and are more compact, allowing you to deploy them in tight spaces.

The Crystal EP Plug increased focus and vocal texture, with more bass power. Dynamic contrast increased with instruments and vocals becoming more distinct. The effect was very noticeable with a 3.5mm EP Plug inserted into a Creative Soundblaster X4 DAC/headamp, with similar results pairing an RCA EP Plug with a Schitt Audio Freya+ preamp. Using twin RCA EP Plugs (on an unused input and output socket) increased the effect, but also sounded a bit too forceful and artificial for my taste. 

Linking the EP Plug to a Crystal E Ground Box increased the level of refinement across the board, and added a calm sereneness to the music. It also added midbass weight which balanced out the extra energy on the midrange and treble. This turned out to be my favourite combination in listening tests. 

As counter-intuitive as it sounds, do also try grounding the phono stage in your integrated amplifier (even if you don't play records). Attaching the Crystal E Ground Box to the ground lug of the Marantz 40N gave great sonic dividends, sorting out a vague and diffuse sound stage. 

I tried adding Crystal EP Plugs to the negative terminal of my speakers. While the effect was similar, I found it to be more subtle compared to tweaking the source equipment. As I only had a single Crystal E Ground Box on hand, I was not able to ground both plugs.

Conclusion

The Kojo Crystal EP Plug and Crystal E Ground Box earn an easy Best Buy award from me. Improve your system for a modest outlay! However, as with all grounding products, do try before you buy since tweaks of this nature are highly system-dependent. 

A big thank you goes out to Sky Audio Singapore, local distributor of Kojo products for providing the review samples. I personally purchased the EP Plug and Crystal E Ground Box.

Catch them too at International Sound & Sight Exhibition 2022. The show will be on 2-4 December at Holiday Inn Singapore Orchard City Centre, 11 Cavenagh Road, Singapore 229616.  

Kojo Technology

Crystal E Ground Box - S$ 450 per piece

Crystal EP Plug - S$ 225 per piece (promotional price)    

Sky Audio Singapore

28 Sin Ming Lane,

#05-137 Midview City

Singapore 573972

http://www.skyaudio.net


Saturday, September 10, 2022

Grimm MU1 Music Player

Grimm MU1 Review

Grimm Audio was founded in 2004 and is based in Eindhoven, The Netherlands. Helmed by Eelco Grimm and Guido Tent, Grimm is well-known in professional audio circles.

Grimm claims that the MU1 is the ultimate digital musical source. That's certainly a bold claim - let's see whether the MU1 performs as claimed.

Description

Underneath the hood, the MU1 runs its software on a Linux-based Intel i3 computer board and an in-house designed FPGA board which runs format and sample rate conversion. An ultra-low jitter clock (<0.6 ps RMS (>10 Hz)) completes the picture. Hey, it’s a Grimm and you wouldn’t expect anything less would you?

At the moment, the MU1 is a Roon-based solution that acts as both Roon Core and Roon End-Point. There are plans to offer a DLNA solution in the future though. Tidal and Qobuz support are available through the Roon app, but Spotify Connect is not supported. 

The MU1 is available with internal music storage of up to 8TB. Otherwise, you can use network storage or an external drive connected to the twin USB 3.0 ports on the MU1.

Three digital inputs (AES, coaxial and Toslink) are provided which allows the MU1 to process external data streams, allowing other digital sources to enjoy the goodness of the MU1.

The FPGA upsamples the data stream to either 2x or 4x of the sampling rate before being sent to the two AES or single coaxial digital outputs. A fourth digital output via an RJ45 port serves as a proprietary connection for the Grimm LS1 speaker. The digital outputs may also be configured for 6-channel output for surround sound use. No preamplifier ? No issue – there is a digital volume control on hand too. As there is no way to attenuate DSD streams, conversion to PCM is required to make use of the volume control.  

Setting Up

Hook up the MU1 to your network via its LAN port (wireless connection is not available), switch on the power, and you are ready to go. The difficulty factor depends on how familiar you are with Roon. As a long-time Roon user, setup was straightforward. The well-written manual is comprehensive, and I spent less than an hour setting up the MU1 and loading my test tracks into the internal drive. The unit connected to the internet and prompted an upgrade to its firmware. Grimm has worked hard in the past to upgrade the performance of the MU1, so you can expect steady improvements in performance over time.

Operation













The giant wheel on top of the unit controls the MU1. With a combination of short/long presses and turning the wheel, you can access the various menu options. Most users would navigate their library and operate playback through the Roon App, whether running on their mobile phones or a tablet.













The sampling rate conversion can be switched to “Original”, “2FS Oversampling” or “4FS Oversampling”. If “2FS Oversampling” is selected, files at 44.1 and 48 kHz sampling rate will be upsampled at 2FS, while 88.2 and 96 kHz sampling rate files will be played at their native sampling rate. In the case of files over the targeted oversampling rate, they will be downsampled (e.g. 8FS and DSD material). The MU1 also supports DoP in case the user prefers to play DSD files natively on their DAC.

The USB port can also be enabled to output data, but I found it sounded inferior to the AES and SPDIF outputs when paired with my Totaldac D1-Six DAC. 

Programmable remote-control operation is possible if an external IR receiver is connected to the 3.5mm jack provided on the rear of the unit. As I did not have an IR receiver on hand, this function was not tested.

Sound Quality

The MU1 is simply the finest quality Roon playback I have heard bar none. The tone is a fluid, almost analog-like quality with powerful dynamics and extended highs. My Roon ROCK (Roon Optimized Core Kit) server runs on an Intel i7-based NUC fitted into a fan-less Akasa Turing chassis for fully passive cooling. The MU1 ran rings around my home rig, to the point that the performance gap between the two was simply unbridgeable.

One very important caveat is that the performance lead of the MU1 depends on your source material and how you employ upsampling (or not). The lead narrows considerably if you are playing  DSD natively, or PCM files without upsampling. I am personally not a big fan of upsampling, but the MU1 does this in a way that improves sound quality so significantly in terms of separation and detail that you will just leave the upsampling enabled permanently.  

If you are a DSD fan and your DAC does not support DoP, operation will also be cumbersome. You will need to change your Roon settings to output the digital stream via the USB port, which then leaves you without upsampling. You could connect up your DAC via the SPDIF or AES output, and toggle between the two signal paths, but the routine will quickly become old. The other alternative would be to stick to the SPDIF or AES output, and convert all DSD streams to PCM – something bound to offend a DSD purist!

Coming back to the sonics, there is a certain rightness to the MU1. Bass is very tight and powerful, and piano notes have a rich solidity and realism that fills the room. The midrange is on the warmer side of things, and vocals have a warmth and richness that is creamy and inviting. This is coupled with very extended and clear high frequencies that reveals plenty of detail and air. Counter-balanced with the hefty low-end and warm midrange, you end up with a tone that is not bright at all, yet highly detailed and easy to listen to. This is not a product that plays the neutrality card, but instead takes the path of connecting emotionally with the listener. 

The way the MU1 produces music is very special - music is highly energetic, yet natural and non-fatiguing. Your brain instantly registers that the MU1 is a rare and outstanding product that stands out from the crowd. 

Closing Thoughts

This is a niche product. If you dislike Roon or want ruler-flat neutrality, you should look at something else. Some audiophiles would balk at the price-tag of the MU1 and insist that this is an overpriced computer server build. An audition should quickly sort that out. I know of several experienced audiophiles and reviewers that purchased the MU1 after experiencing what it brings to their system. Although the outcome would be Grimm for my bank account, I definitely want one! Highly Recommended.


Grimm MU1 Music Player

Price - S$16,000 (excluding GST and with 4TB SSD internal storage)

Grimm products are available from :-


Sound Affairs Pte Ltd

110 Lorong 23 Geylang #06-03
Victory Centre
Singapore 388410

http://www.mysoundaffairs.com/



Saturday, February 5, 2022

WFH Special #2 - Creative Outlier Air V3

Introduction

Not a fan of wired headsets for your office conference calls? Consider true wireless in-ear-monitors as an alternative. Lightweight and comfortable, they are a more practical choice in tropical weather if you do not run air-conditioning. 

Apart from office use, they will be perfect for accompanying you for your exercise sessions, or travelling. This makes them an easy sell to the Minister of Finance at home. 

Description

The Outlier Air V3 ("V3") is the third-generation version of the Outlier Air - Creative's true wireless in-ear-monitors. 

The charging case remains at about the same size as the original Outlier Air ("V1") which means that it is bulky and clunky to carry around. Sharing the same footprint, the V3 case is slightly taller. You do get 40 hours of playtime though with 10 hours per charge, which is improvement over the 30 hour lifespan of the original model. The case may be charged via a USB-C port, or Qi-compatible wireless charging. Charging time via cable is between 2 to 3 hours.








The V3 uses Bluetooth V 5.2. Supported audio codes are AAC and SBC. Purists will be disappointed to note that aptX support has been dropped. Like the V1, the V3 is IPX5 certified for water resistance. 

The driver for the V3 uses a 6 mm bio-cellulose driver, which is a change from the 5.6 mm graphene-coated drivers used in the V1. 

The V3 case, fully loaded with earbuds weighed in at 76.6 grams, compared to 61.8 grams for the V1. The earbuds for the V3 are 5.3 grams in weight (per side), while the V1 are 5.1 grams. 

By default, the usual volume and play control functions, Siri or Google Assistant, as well as ambient and active noise reduction modes are accessible via touch control. However, you can also customise the controls via the Creative App. This App is also used to flash firmware upgrades and applying EQ settings.




Besides the Creative App, you will need to download the SXFI App to transfer your personal profile over to the Outlier Air. Music also has to be played through this App in order to enjoy SXFI. This is an inconvenience, especially if your music source is from a streaming service since the App supports playback of local music files only.  

Use, Fit and Comfort 

Taking the earbuds out of the case will put the V3 into pairing mode automatically. You also have the option of just using one side (useful for conference calls). I noticed that the earbuds would also squeal loudly when being returned to their case. I traced this to feedback from the microphones when either ambient mode or active noise reduction is being used. Alternatively, place the earbuds back in the case one at a time to avoid this. 

Fit will be subjective. The V1 with its larger shell, fitted my ears better and provided a better seal. The V3 felt less secure, and did not seal as well in my right ear. However, this can be easily remedied by changing out the tips to suit your personal preference. The V3 sat quite securely during exercise sessions, although I would feel less confident to use them for long runs. They were also comfortable enough to be used for long listening sessions.

Battery life was consistent with specifications and the V3 had no issue connecting with my phone placed about 6m away so long as line-of-sight is maintained. 

Sound

The V3 turned in a competent performance, with a significant improvement over the V1. Bass performance was tighter and more impactful, while midrange was much clearer - the V1 had a tendency to sound muffled and nasal. High frequencies also had a touch more openness and extension. Soundstaging on the V3 was also wider and more spacious, with better placement of voices and instruments. 

Tonally, I would say that the V3 had a slightly warm balance, with neutral bass and highs, and a laidback midrange. Some listeners may find the bass balance a bit light, but this can be fixed in the EQ settings.

Putting aside the richer feature set, the V3's sonic performance is reason enough to upgrade from the V1. 

The active noise reduction works reasonably well. However, as the name suggests it attenuates outside noise instead of canceling it. Nevertheless, the end result is good enough for the typical home environment, or for traveling. 

The microphone pickup is above average and voice pick-up is reasonably clear.  

Conclusion

The V3 is a solid performer at a bargain price. The Singapore online shop regularly runs promotions, and you can usually get a pair at a good discount - Best Buy

Creative Outlier Air V3

Driver
6 mm Bio-cellulose Driver
Battery Type and Life
Battery in Charging Case: 1 x Rechargeable Lithium Polymer Battery 450 mAh, Battery in Earbuds: 2 x Rechargeable Lithium-ion Polymer Battery 55 mAh
Charging Time
2 to 3 hours
Connector Type
Bluetooth 5.2
Audio Codec
AAC, SBC
Weather-proof Resistant
IPX5
Price - S$ 99