The first things that strikes you about the Aurelia Cerica is its unusual looks.Unlike most speakers, the Aurelia is slim and quite attractive to the eye - both for the Audiophile and the unafflicted. The sample I saw one early afternoon at the local dealer was finished in gloss white.
The next thing you will notice is its unusual driver arrangement, which has a symmetrical array of two mid-bass units flanking a cluster of three tweeters. The tweeters appeared to be recessed in a shallow wave guide.
On the rear panel of the speakers,are a single pair of high quality binding terminals, and a presence switch. The dealer explained that this controlled the high frequency output, with the "hi" position recommended for tube amplification, and the "lo" position for solid state systems.
Firing up the Cerica, the immediate impression is one of both coherence and immediacy. The full range driver crowd will feel right at home here. The second thing that impresses is the size of the speaker's imaging and soundstaging.
The Cerica has a very "live" and fast sound, and is quite different from the typical audiophile speaker which sounds more damped, and drier. Vocals take center stage, with a big emphasis on vocal texture and inflection. Listeners who like their vocals presented with laser focused precision are advised to look elsewhere. Music is presented with a very big and dynamic feel, more akin to a live performance, compared to listening to a recording over studio monitors.
Detail retrieval is excellent, with low level spatial clues coming across clearly. High frequencies are "wetter" than normal, with a strong emphasis on reproduction of acoustic space. I felt that its presentation was a little bit too bright, which could be an issue with partnering equipment - I heard them driven by a full set of Trigon electronics. Perhaps, a longer audition with softer sounding equipment is in order.
The Cerica has limited bass though, with no sonic illusions that the Cerica is a bookshelf speaker. Fortunately, the limited bass on offer is at all times, fast, tuneful and tight.
In conclusion, the Cerica is quite different in its presentation from the typical audiophile speaker, and may not suit all taste. However, listeners who demand a lively, dynamic and detailed speaker, with looks that need no excuses are well advised to give the Cerica a serious audition. In gloss white, the Cerica would blend in perfectly in modern styled homes.
Pricing is also competitive. My guesstimate of the Cerica's price pleasantly turned out to be more than 30 % off the mark.
Part Two
A week after the initial audition, I returned to the dealer who had re-positioned the speaker as well as the spare equipment around it. It happened to be playing when I dropped by and I immediately noticed that the speaker sounded totally different from my first audition.
The speaker sounded neutral, without any hint of brightness which I experienced earlier. The partnering equipment was identical - looks like this speaker requires a bit of setup to make it sing. Bass output was much more, far more than its cabinet size would suggest. On the downside, I felt that the immediacy and vibrancy was better the first time round.
Part Three
I just heard this at the International Sight and Sound Exhibition 2012. It sounded really great in the small hotel room, with both deep, extended bass, and an immediate midrange coupled with extended high frequencies. In fact, the Cerica sounded much better compared to the earlier two occasions I listened to it.
Sunday, September 23, 2012
Thursday, August 2, 2012
Darkz Footer (updated on 21 April 2014)
The Darkz footer is a new footer from Ansuz Acoustics. The footer is made out of 3 stacked circular aluminium discs with 3 ceramic ball bearings coupling the discs, i.e. there is a total of 6 ceramic ball bearings per footer.
The top and bottom discs have a further 3 circular depressions, to aid stacking if you wish to do so. You will obviously need to find an additional 3 ball bearings to do so, although none are provided. The whole assembly is sealed and the discs and ball bearings all stay in place.
The assembly can be opened by carefully applying some pressure to the central column and rotating the top and bottom halves in opposite directions. The two halves are coupled via a finely threaded rod.
The footer on test here is the base aluminium model in the line-up. More expensive models include a ceramic coated model, and a diamond coated one. In any event, the aluminium model sells for a not modest sum - S$500 for a set of four.
I initially intended to use all four footers, but settled on using three instead. Using four footers was an uphill battle, involving copious amounts of paper as shims to try and balance out the footers perfectly. In this respect, I am far fonder of height adjustable footers, like the Finite Elemente Cerabase.
My evaluation of this footer ended up taking far longer than usual, as it ended up under a whole variety of equipment, including my mains distributor, DAC, preamp, poweramp, and even my Entreq Tellus grounding conditioner.
The Darkz consistently added a focused precision to music, with instruments and voices being very specific and pin point. There was also an increased sense of texture and decay. Soundstaging was presented in a more distant manner, which helped increase the feeling of depth in the system. On the downside, the overall tonal balance was leaner. The reduction of midrange warmth, together with the accentuation of leading edges tended to emphasize sibilance in my system. I also felt that the increased decay resulted in a perception of reduction of speed. In simpler tracks, with just a female singer, accompanied by a Piano, this was observed as a reduction is impact and scale of left hand notes, and a leanness in the female voice.
The above observations generally held true for most of the equipment I tried the Darkz with. After extended listening sessions, I eventually preferred my system without the Darkz, as I did not feel that the tonal balance of my system was going the right way.
After some head scratching, I decided to disassemble the Darkz and place small strips of fo.Q (TA-52) damping tape on the inner facing sides of the top and bottom discs. This reduced the slight glare and leanness of the stock Darkz. As like all other tweaks, your mileage may vary.
Close two years after the initial review, the local distributor for Ansuz, Giraffe Signature suggested that I give a five and four tier Darkz a try, as well as experiment with additional ceramic balls between the footer and the component being supported. To facilitate this, I was passed a bag full of ceramic balls (plenty to try out almost every configuration possible), and a five tier Darkz.
![]() |
| Four tiers with additional ceramic balls on top |
![]() |
| Four tiers - make your own by disassembling your spare Darkz footer |
![]() |
| Five tiers - the unfinished central column suggests that this is a prototype rather than a finished product |
Stock Footer (Three tiers)
I tried this again to refresh my memory and my impressions were not changed. The stock footer was simply too analytical for my taste.
Three Tiers with additional ceramic balls
Add in three ceramic balls on top of each footer and this is a wholly different ball game (pun intended). There is an improvement in smoothness, bloom and length of decay. I still felt that there was a slight bit of an edge to music, but it was still a massive improvement over the stock footer.
Four Tiers
A lower noise floor with a smooth, articulate and nice bloomy sound. Any previous complaints were now complete forgotten.
Five Tiers
Even longer decay and shockingly low noise floor. This is my favourite configuration. It worked very well also in my friend's setup.
Five Tiers with additional ceramic balls
I felt that this improved edge definition but that slight hardness was back. Some guys would like this combination, as it offered the best of both worlds (at a price), but I preferred the glare free sound of the Four Tier and Five Tier configuration. So did my friend when we tried it in his setup.
Final Thoughts
The above configurations are well worth exploring for Darkz users. Moving from one stack level to the next mainly affected the noise floor, resolution, articulation and length of decay. It was interesting to note also that the staging and tonal balance was quite similar once you hit a three tier level with additional ceramic balls.
Perhaps Ansuz should have launched the product as a four or five tier footer from the beginning ? Well, better late than never.
Thursday, July 19, 2012
Schitt Lyr Headamp
Holy Schitt !
I just put some money down for the Schitt Lyr. The distributor, Audio Iconic is presently out of stock, with a new shipment coming in at the end of the month.
Owners of hard-to-drive orthodynamic headphones are probably already very familiar with the Lyr, which boasts 6 watts of power, and 40 volts output capability into a 32 ohm load. Actually my Audeze LCD-2 Rev 1 is relatively easy to drive as far orthodynamic headphones go, but the Audeze / Lyr pairing is quite often recommended on forums, so I thought I would check it out.
A quick listen (across 3 tracks) with the distributor's LCD-2 Rev 2, to the bottom rung Asgard and the Lyr indicated that the Lyr was the way to go. I was hoping to save a bit of money, but it was not meant to be. The Asgard sounded too smooth and flat, with a lack of dynamics and bite. The Lyr had a wetter and more prominent bass, with a relatively dry top end sparkle that matches well with the Audeze which can sometimes sound a little bit dark. I love tube equipment, so secretly, maybe I was hoping that I would be "forced" to choose the Lyr. Well, as a matter of clarification, the Lyr is a hybrid unit, combining a MOSFET stage and two dual triode ECC88 tubes.
Both units had no problem with volume. Even with the Asgard, I never made it past the 12 o'clock mark. Strangely, the Asgard had a faint high pitched whine that could be heard during faint passages. It was not a grounding issue, because the unit is dead silent when no music was being played. The Lyr was problem free during the short audition.
Of notable mention for the Lyr, is its ability to be used as a preamp. I will be sure to put the Lyr through its paces when I eventually receive mine. It was due to arrive a few weeks after my audition, but is probably more like to arrive sometime at the end of September.
Fast forward to mid October, and after considerable delay, stock of the Schitt finally arrived in Singapore. There was momentary panic at the dealer's shop, when I opened up my Schitt Lyr box, only to find a Valhalla unit inside. Luckily, there was another box of the Lyr available, which had been packed without mishap.
After considerable run-in, the Lyr was put through its paces with my Beyer DT-880 (250 ohm version) and my Audeze. The most striking impression of the Lyr is heat. This is one hot amp ! The heat is primarily on the right side of the unit, and you could probably toast marshmallows at the same time while listening to music. The second most striking thing is unlimited drive capability. No jokes about the current and voltage dumping capability. You will toast your cans and ears way before you run out of juice.
Pairing with the Beyer is pleasant. Beyer users will know that the DT-880 can sometimes sound overly analytical and bright. The slight richness of the Lyr will put that right, as well as adding a nice wallop to the bass where it it sorely needed. I was not able to compare the Lyr with the competition, having only an ageing Original Master headamp for comparison. The Lyr easily smoked the Original Master on all usual audiophile aspects such as dynamics, resolution and staging.
Moving on to the Audeze, things really start cooking (metaphorically, not literally). Despite the creamy and slightly rich balance of the Lyr, the Audeze pairs nicely with the Lyr. Let's face it - the Audeze is dark sounding. Switching between the Beyer and Audeze always needs a few minutes of adjustment. Once you are over that, you get the most impressive and natural drum and piano notes. The sense of soundstaging which is far beyond the confines of your head remind you of why you started loving ortho cans in the first place.
With my limited experience in the headphone world, there could be better matches with the Audeze, but the Lyr suits me just fine.
Oh, and before I forget, the preamp function is merely functional - get a proper preamp.
I just put some money down for the Schitt Lyr. The distributor, Audio Iconic is presently out of stock, with a new shipment coming in at the end of the month.
Owners of hard-to-drive orthodynamic headphones are probably already very familiar with the Lyr, which boasts 6 watts of power, and 40 volts output capability into a 32 ohm load. Actually my Audeze LCD-2 Rev 1 is relatively easy to drive as far orthodynamic headphones go, but the Audeze / Lyr pairing is quite often recommended on forums, so I thought I would check it out.
A quick listen (across 3 tracks) with the distributor's LCD-2 Rev 2, to the bottom rung Asgard and the Lyr indicated that the Lyr was the way to go. I was hoping to save a bit of money, but it was not meant to be. The Asgard sounded too smooth and flat, with a lack of dynamics and bite. The Lyr had a wetter and more prominent bass, with a relatively dry top end sparkle that matches well with the Audeze which can sometimes sound a little bit dark. I love tube equipment, so secretly, maybe I was hoping that I would be "forced" to choose the Lyr. Well, as a matter of clarification, the Lyr is a hybrid unit, combining a MOSFET stage and two dual triode ECC88 tubes.
Both units had no problem with volume. Even with the Asgard, I never made it past the 12 o'clock mark. Strangely, the Asgard had a faint high pitched whine that could be heard during faint passages. It was not a grounding issue, because the unit is dead silent when no music was being played. The Lyr was problem free during the short audition.
Of notable mention for the Lyr, is its ability to be used as a preamp. I will be sure to put the Lyr through its paces when I eventually receive mine. It was due to arrive a few weeks after my audition, but is probably more like to arrive sometime at the end of September.
Fast forward to mid October, and after considerable delay, stock of the Schitt finally arrived in Singapore. There was momentary panic at the dealer's shop, when I opened up my Schitt Lyr box, only to find a Valhalla unit inside. Luckily, there was another box of the Lyr available, which had been packed without mishap.
After considerable run-in, the Lyr was put through its paces with my Beyer DT-880 (250 ohm version) and my Audeze. The most striking impression of the Lyr is heat. This is one hot amp ! The heat is primarily on the right side of the unit, and you could probably toast marshmallows at the same time while listening to music. The second most striking thing is unlimited drive capability. No jokes about the current and voltage dumping capability. You will toast your cans and ears way before you run out of juice.
Pairing with the Beyer is pleasant. Beyer users will know that the DT-880 can sometimes sound overly analytical and bright. The slight richness of the Lyr will put that right, as well as adding a nice wallop to the bass where it it sorely needed. I was not able to compare the Lyr with the competition, having only an ageing Original Master headamp for comparison. The Lyr easily smoked the Original Master on all usual audiophile aspects such as dynamics, resolution and staging.
Moving on to the Audeze, things really start cooking (metaphorically, not literally). Despite the creamy and slightly rich balance of the Lyr, the Audeze pairs nicely with the Lyr. Let's face it - the Audeze is dark sounding. Switching between the Beyer and Audeze always needs a few minutes of adjustment. Once you are over that, you get the most impressive and natural drum and piano notes. The sense of soundstaging which is far beyond the confines of your head remind you of why you started loving ortho cans in the first place.
With my limited experience in the headphone world, there could be better matches with the Audeze, but the Lyr suits me just fine.
Oh, and before I forget, the preamp function is merely functional - get a proper preamp.
Subscribe to:
Posts (Atom)




